Juicer Repair Services

Juicer Repair Services  in Nairobi, Thika, Kiambu, Limuru, Machakos, Ngong and the rest of Kenya; Installation, maintenance and fault diagnosis services, parts and spares repair, sales and supplies, and replacement services experts and technicians in Kenya

Juicers at work

A juicer is a kitchen appliance that is used to extract juice from fruits and vegetables. There are different types of juicers, but most of them work on the same basic principle.

The juicer consists of a motorized base, a feed chute, a strainer or filter, and a juice container. To use a juicer, you first need to prepare the fruits and vegetables by washing them, cutting them into smaller pieces if necessary, and removing any seeds or pits.

Once the fruits and vegetables are prepared, you can turn on the juicer and start feeding them through the feed chute. The feed chute is a narrow opening that leads to a spinning blade or auger, which grinds and crushes the produce into a pulp.

As the produce is crushed, the juice is separated from the pulp by a strainer or filter, and the juice flows into a container. Some juicers also have a pulp container that collects the leftover pulp.

The type of juicer you use can affect the quality of the juice. Centrifugal juicers, which use a spinning blade, tend to produce juice with more pulp and foam. Masticating juicers, which use a slower, chewing motion, tend to produce juice with less pulp and foam.

Overall, juicers are a convenient and efficient way to extract fresh juice from fruits and vegetables, providing a healthy and delicious way to get your daily dose of vitamins and nutrients.

How to Fix a Broken Juicer

The steps to fix a broken juicer will depend on the specific issue that is causing it to malfunction. Here are some general troubleshooting steps you can take:

1. Check the power source: Make sure the juicer is plugged in and the outlet is functioning properly. You can test the outlet by plugging in another appliance.
2. Check the blades or auger: If the juicer is not properly crushing or grinding the fruits and vegetables, it may be due to dull or worn-out blades or an auger that is clogged with pulp. Check the blades or auger for any signs of damage or wear and tear. Clean the blades or auger and replace them if necessary.
3. Check the motor: If the motor is not functioning properly, it may be due to a problem with the wiring, the switch or the motor itself. Check for any loose connections or frayed wires. If you’re not comfortable working with electronics, contact a professional for assistance.
4. Check the strainer or filter: If the juicer is producing less juice than usual or the juice is not as smooth as it should be, it may be due to a strainer or filter that is clogged or dirty. Clean the strainer or filter and replace it if necessary.
5. Clean the juicer: Over time, juicers can become clogged with pulp and other debris. Cleaning the machine can often help restore it to working condition. Follow the manufacturer’s instructions for cleaning the juicer.

If none of these troubleshooting steps work, contact the manufacturer for assistance or consider replacing the juicer.