Air Purifier Repair services in Nairobi, Thika, Kiambu, Limuru, Machakos, Ngong and the rest of Kenya; Installation, maintenance and fault diagnosis services, parts and spares repair, sales and supplies, and replacement services experts and technicians in Kenya

An air purifier is a device that is designed to remove pollutants and contaminants from the air. There are different types of air purifiers, but the most common type is a mechanical air filter, which works as follows:

1. Air is drawn into the air purifier through a fan.
2. The air passes through one or more filters, which trap pollutants and contaminants such as dust, pollen, pet dander, and smoke.
3. The clean air is then released back into the room.

Some air purifiers use additional technologies to remove pollutants from the air, such as:

1. UV-C light: This type of air purifier uses ultraviolet light to kill bacteria and viruses.
2. Ionizers: These air purifiers use charged ions to attract and remove pollutants from the air.
3. Activated carbon filters: These filters absorb odors and chemicals from the air.
4. Ozone generators: These air purifiers use ozone to remove pollutants from the air, but they can also produce harmful byproducts and are not recommended for use in occupied spaces.

It’s important to note that air purifiers can only remove pollutants that are present in the air that passes through the device. They cannot remove pollutants that are already settled on surfaces in the room, and they may not be effective at removing certain types of pollutants such as volatile organic compounds (VOCs).

The process for fixing a broken air purifier can vary depending on the specific issue that the device is experiencing. However, here are some general troubleshooting steps you can take:

1. Check the power source: Make sure the air purifier is properly plugged in and the outlet is working. Also, check the power cord for any damage or wear.
2. Clean the filters: Dirty or clogged filters can cause an air purifier to malfunction. Refer to the manufacturer’s instructions to clean or replace the filters.
3. Check the fan: If the fan is not working, the air purifier may not be able to circulate air properly. Clean the fan blades and check for any obstructions. If the fan motor is faulty, it may need to be replaced.
4. Check for damage: Look for any physical damage to the air purifier, such as a cracked housing or damaged control panel. If there is damage, it may need to be repaired or replaced.
5. Reset the air purifier: Some air purifiers have a reset button or option that can be used to reset the device to its factory settings.
6. Contact the manufacturer: If none of the above steps work, contact the manufacturer for assistance. They may be able to provide additional troubleshooting tips or arrange for repairs or a replacement if the device is still under warranty.

It’s important to follow the manufacturer’s instructions when attempting to repair or troubleshoot an air purifier to avoid causing further damage or voiding the warranty.