Water Heater Repair services in Nairobi, Thika, Kiambu, Limuru, Machakos, Ngong and the rest of Kenya; Installation, maintenance and fault diagnosis services, parts and spares repair, sales and supplies, and replacement services experts and technicians in Kenya

A water heater is a device that is used to heat water for various purposes such as bathing, washing, and cooking. There are different types of water heaters, but the most common type is a tank-style water heater, which works as follows:

1. The tank is filled with cold water from the main water supply.
2. The heating element, which is typically a gas burner or an electric heating element, heats the water in the tank to the desired temperature.
3. The hot water is stored in the tank until it is needed.
4. When hot water is needed, it is drawn from the tank through a hot water outlet pipe and used for various purposes.
5. As hot water is drawn from the tank, cold water enters the tank through a cold water inlet pipe to replace it.
6. The heating element continues to heat the water in the tank as needed to maintain the desired temperature.

There are also tankless water heaters, which work differently than tank-style water heaters. Tankless water heaters heat water on demand, as it passes through a heating element or coil. These types of water heaters are more energy-efficient than tank-style water heaters, but they can be more expensive to purchase and install.

The process for fixing a broken water heater can vary depending on the specific issue that the device is experiencing. However, here are some general troubleshooting steps you can take:

1. Check the power source: If you have an electric water heater, make sure it is properly plugged in and the circuit breaker is on. If you have a gas water heater, check that the pilot light is lit.
2. Check the thermostat: If the water is not getting hot enough, the thermostat may need to be adjusted. Refer to the manufacturer’s instructions to adjust the thermostat.
3. Check the heating element: If you have an electric water heater, the heating element may be faulty and need to be replaced. Refer to the manufacturer’s instructions to replace the heating element.
4. Check the thermocouple: If you have a gas water heater, the thermocouple may be faulty and need to be replaced. Refer to the manufacturer’s instructions to replace the thermocouple.
5. Check for leaks: If you notice water leaking from the water heater, it may be due to a faulty valve or connection. Check for any visible leaks and tighten or replace any loose connections.
6. Contact a professional: If none of the above steps work or if you are unsure about how to proceed, it’s best to contact a professional plumber or HVAC technician for assistance. They will have the necessary knowledge and tools to diagnose and fix the issue.

It’s important to follow the manufacturer’s instructions when attempting to repair or troubleshoot a water heater to avoid causing further damage or voiding the warranty. Also, keep in mind that working with water heaters can be dangerous, so exercise caution and turn off the power source or gas supply before attempting any repairs.